$550.00
The ND200-2 Sample Concentrator is microprocessor controlled and comes with a PID controller tuned with fuzzy logic. In comparison to a traditional water bath device, this devices’ heat-conducting medium is made from high purity aluminum. The test tubes are held in a block, and using Nitrogen blowdown, the device accelerates evaporation of many samples at a time.
| Type | Description | Type | Description |
| MD50 | 12x10mm | MD54 | 12x16mm |
| MD51 | 12x12mm | MD55 | 12x19mm |
| MD52 | 12x13mm | MD56 | 12x20mm |
| MD53 | 12x15mm | — | — |
| Item # | ND200-2 |
| Temp range | RT.+5°C-160°C |
| Temp accuracy | ±0.5°C (@40°C) |
| Temp accuracy | ±1°C( @120°C) |
| Temp uniformity | ≤ ±0.5°C |
| Display accuracy | 0.1°C |
| Timing range | 1min – 99h59min |
| Heating time | ≤15min (from 25°C to 160°C) |
| Needle length | 150mm |
| Nitrogen flow rate | 15L/min |
| Nitrogen pressure | 0.1Mpa |
| Block quantity | 2 |
| Max power | 500W |
| Voltage | AC220V or AC110V, 50/60Hz |
| Dimension(mm) | 260X220X475 |
| Weight(kg) | 7.5 |
© Copyrights 2023 3P BioSolutions Inc. | All Rights Reserved.